After tidal water enters a Maine home, the first 48 hours decide most of the outcome. Make the building safe, document everything before anything moves, get standing salt water out, separate contaminated contents, and start controlled drying. Salt residue and corrosion are the problems that outlast the tide.
Key takeaways
- On January 13, 2024 the Portland tide gauge reached 14.57 feet MLLW, above the 1978 reading of 14.17 - a preliminary figure, and among the highest ever recorded here.
- The cause was a combination of heavy rain, an astronomical high tide and strong winds, which is why the water arrived fast and left on the next ebb.
- Commercial Street at Chandler's Wharf, Marginal Way, Franklin Street, Congress Street and Stroudwater Crossing on Outer Congress Street all flooded.
- Salt water is handled as contaminated water: porous material in the wetted zone comes out, and metal, fixings and heating components need rinsing and inspection.
- FEMA disaster declaration 4764 covered the January 9 to 13, 2024 storms, with Cumberland and York Counties eligible, so documentation matters beyond the insurer.
- Higgins Beach in Scarborough flooded three times during 2024, the third time on March 10, which is why a one-off response plan is the wrong plan on this coast.
What happened on January 13, 2024, and why does it shape the response?
The Portland tide gauge reached 14.57 feet MLLW, a preliminary reading above the 1978 record of 14.17 and among the highest ever recorded. Heavy rain, an astronomical high tide and strong winds arrived together, after a first storm on January 10. The water rose and fell within a tide cycle.
That timing is the thing to understand. A river flood builds and drains over days; a storm-surge flood on Casco Bay arrives on a tide and is gone by the next low water, which means a homeowner is often standing in a drained room within hours, looking at what appears to be a wet floor and nothing more. The damage that matters has already gone into sills, subfloor, cavity insulation and anything metal, and it is still working while the floor looks like a mopping job.
The flooded ground was not random either. Water reached Commercial Street at Chandler's Wharf, Marginal Way, Franklin Street, Congress Street and Stroudwater Crossing on Outer Congress Street - low, mostly made or filled ground near the harbor and the Fore River. Outside the city the same tide took the fish shacks at Willard Beach in South Portland, flooded Pine Point Road in Scarborough, hit Higgins Beach with a nine-foot tide, destroyed the Potts Point dock in Harpswell, and tore out roads and seawalls at Camp Ellis in Saco, where a resident described four homes as destroyed.
What do you do in the first hour after tidal water enters?
Deal with people and power first. Do not walk into standing water in a basement with live circuits, do not restart a submerged furnace or pump, and get everyone out of the wet floor level. Then photograph the water at its level before it drains, because that evidence disappears with the tide.
The order is safety, evidence, water, materials. Safety means treating a flooded floor as electrically live until you know otherwise, and shutting off power to the affected level at the panel only if you can reach the panel dry; if you cannot, that is a call to the utility or an electrician, not a reach into the dark. Submerged gas and oil heating equipment, electric water heaters and well pumps are not restarted - they are inspected first.
Evidence is the step people skip and regret. A surge flood proves itself for a very short time: once the tide pulls back there is no high-water mark on a painted cellar wall, only damp. Photograph each room with something in frame that gives scale, photograph the waterline on walls, doors and stair risers, and photograph contents where they sat. Then get the water out. A pump plus extraction is the first real restoration step, and the sooner it starts the more material stays savable.
Why is salt water treated differently from rain or pipe water?
Because it is contaminated and corrosive. Water that crossed ground and harbor carries whatever was on that ground, so it is handled as a health hazard. Salt itself stays behind after drying, holds moisture in porous material, and attacks fasteners, appliance bases and heating components for months.
Two separate problems share one event. The contamination problem is handled the way any black-water loss is handled: porous material in the wetted zone - carpet and pad, cavity insulation, particle board, soaked plasterboard, upholstered contents - is removed rather than dried, hard surfaces are cleaned and treated, and the work area is contained so nothing is carried through the dry part of the house. That is not caution for its own sake; a flooded Casco Bay cellar has had sea water, street runoff and whatever the storm drains carried, all at once.
The salt problem is slower and is why coastal flood work has a step inland work does not. Salt residue is hygroscopic: it draws moisture out of the air, so a wall that reads dry in February can read damp again in a humid July. Surfaces that took sea water are rinsed with clean water and then dried, metal fixings and strapping are checked, and anything mechanical that was submerged is looked at by the relevant trade. Skipping the rinse is how a job passes its final readings and still fails a year later.
What comes out of the building, and what can stay?
In a salt-water loss, soft and porous material in the flooded zone comes out: insulation, carpet and pad, engineered board, soaked gypsum, mattresses and upholstery. Solid wood, plaster, masonry and sealed hard surfaces are usually cleaned and dried in place. Documents and irreplaceable items are set aside wet, not discarded.
The dividing line is whether a material can be cleaned all the way through. Closed-cell and solid materials can; anything with air in it that held contaminated water cannot be reliably decontaminated in place, which is why cavity insulation and composite board go even when they look intact. In a Maine house with full-dimension framing and plaster, the framing and often the plaster stay, cut access is made low on the wall to dry the cavity, and the base of the wall is rebuilt afterwards.
Contents need a different decision. Soaked paper, photographs and textiles with sentimental value are not a drying problem to solve in the room - they are set aside, kept cold or frozen if specialists are involved, and dealt with after the structure. The mistake to avoid in the first 48 hours is a skip-first clean-up: once a damaged item is at the kerb, it cannot be photographed, inventoried or assessed, and both an insurer and a disaster program will ask for exactly that.
How do you document a surge flood before anything is thrown away?
Build a record in the order the water left: water level, then contents in place, then materials as they are opened, then readings. Photograph and list before removal, keep a written inventory with rooms and approximate ages, and keep the contractor's moisture log with it.
The reason to be systematic is that two different readers will use the file. An insurer is deciding whether the cause is covered, and after the January 2024 storms a federal declaration added a second audience: FEMA disaster 4764 covered the January 9 to 13 storms with Cumberland and York Counties eligible, and programs like that ask for evidence of damage, not descriptions of it. Photographs taken while the water was in the room are the strongest thing a homeowner can hold.
Keep it boring and complete. Date each batch of photographs, note which room, and do not delete the blurry ones. Write the inventory as you clear, not from memory a week later. Where material is cut out, photograph the cut face so the extent of saturation is visible. The table below is the sequence that works in the first two days; it is a running order, not a schedule, because the tide decides when hour one starts.
| When | What matters most | What to avoid |
|---|---|---|
| While water is in | Keep people off the wet level; photograph the waterline | Entering a flooded basement with power on |
| First hour after it drains | Call for extraction; locate the panel and heating plant | Restarting a submerged furnace, boiler or pump |
| Hours 1 to 6 | Standing water pumped and extracted; contents lifted clear | Bagging damaged contents before photographs |
| Hours 6 to 24 | Contaminated porous material removed; surfaces rinsed | Sealing the room up to keep the cold out |
| Hours 24 to 48 | Controlled drying running; first moisture readings logged | Replacing insulation or closing walls up |
| Through the week | Monitoring visits; mechanical equipment inspected | Treating a dry-looking floor as a finished job |
What about heating systems, oil tanks and electrics in a flooded cellar?
Anything submerged is inspected before it is used. Oil-fired heating plant, boilers, furnaces, electric water heaters, well pumps and the panel itself can be damaged internally without showing it. In a Maine January, arranging temporary heat is part of the emergency response, not an afterthought.
A Portland cellar frequently holds the whole mechanical life of the house: burner, boiler or furnace, an oil tank, the electrical panel, the water heater and in many houses the washer. Sea water in that space is both a damage event and a safety event. Fuel oil released from a tipped or damaged tank is its own clean-up with its own rules, and a cellar that smells of oil after a flood is a reason to get people out and get the right people in.
The heating question is urgent for a second reason: a house that loses heat in January freezes, and a frozen pipe on top of a flood is the pattern that turns a bad week into a rebuilt one. If the heating plant is out, say so when you call, and keep the building above freezing however you reasonably can while drying equipment is running. Our high tide and nor'easter basement flooding work starts from that order of priorities.
Does a federal disaster declaration change what you should do?
It does not change the emergency response, but it changes the paperwork. FEMA disaster 4764 covered the January 9 to 13, 2024 storms with Cumberland and York Counties eligible. Where a declaration exists, keep records to a standard that supports an application as well as a claim.
The practical difference is that two tracks may run at once. An insurance claim turns on cause and policy wording, and a standard homeowners policy excludes flood. A disaster program turns on eligibility and documented damage within a declared period. A homeowner who treats the clean-up as a private matter and discards everything can satisfy neither, which is why the documentation advice above is worth the time it costs on a miserable day.
It also means dates matter. Note when water entered, when it left, when extraction started and when drying finished, because a declaration is written around an incident period. If you are unsure whether anything applies to you, keep the record anyway - it costs nothing to have and cannot be reconstructed later.
How quickly does mold become the second problem?
Growth can begin within a few days on wet organic material at normal indoor temperatures. Cold slows it, which buys a little time in a Maine January, but a closed, unheated building that stays wet is a worse case rather than a better one. Controlled drying is the only reliable answer.
The combination to watch for on this coast is a wet shore property that is then shut up. A seasonal cottage or a flooded island house with the heat off and the doors closed dries slowly, holds humidity, and gives growth exactly what it needs the moment temperatures come up. Opening a building to cold damp air is not drying it either - dehumidification and air movement under control are, which is why equipment is brought in rather than windows simply opened.
Where salt is involved the risk runs longer than the calendar suggests, because residue keeps the material capable of taking moisture back out of the air. If a flooded room has a musty smell weeks after it read dry, that is worth a second set of readings rather than a bottle of cleaner. For what follows if growth has already started, see mold after water damage.
Frequently asked questions
Was January 13, 2024 a record tide in Portland?
The Portland gauge reading of 14.57 feet MLLW was above the 1978 reading of 14.17, but it was preliminary and subject to review, and another analysis citing federal data ranks the event third highest when measured above mean higher high water. The sources disagree on the word record. What is not in dispute is that it was among the highest levels ever recorded here.
The water drained out by itself. Do I still need anyone?
Usually yes, and that is the most common misreading of a surge flood. The tide removes the standing water and leaves the saturation, the contamination and the salt. Sills, subfloor, cavity insulation and anything metal stay wet or compromised long after the room looks passable, and material that is wet for a week is normally removed rather than dried.
Does my homeowners policy cover tidal flooding?
Standard homeowners policies exclude flood, which is covered separately through the National Flood Insurance Program or a private flood policy. That distinction decides a great deal after a storm surge event, so it is worth confirming what you hold before the season rather than during it. Our guide to flood insurance and storm surge on Casco Bay goes through what to check.
Can I just hose the salt off and dry the room out myself?
Rinsing salt residue is genuinely part of the work, but on its own it is not enough and it spreads contaminated water if done before removal. Porous material that held sea water needs to come out first, the area needs containment so nothing is tracked through the house, and drying needs to be measured. Call before you start and ask what is safe to do yourself.
How often does this happen on this coast?
Often enough that a one-off plan is the wrong plan. Two storms hit within days in January 2024, and Higgins Beach in Scarborough flooded three times during that year, the third on March 10. Autumn through winter nor'easters, combined with high astronomical tides, are the pattern. Knowing where your water enters and what sits in its path is the useful preparation.
What should I have ready when I call?
Where the water came in and how high it got, whether it has drained, whether power is on at the affected level, what the heating plant is and whether it was submerged, and whether anything smells of fuel oil. If you have photographs of the water in the room, say so. Portland Water Damage Restoration answers 24/7 on (833) 490-5225 and dispatches a crew as soon as one is available.
Sources
- National Weather Service, Gray, Maine
- Federal Emergency Management Agency
- U.S. Fish and Wildlife Service
This guide is general information for Cumberland County homeowners, not a substitute for an on-site inspection. Prices are estimates. See our disclaimer.